dsh-codeg-adapter

Launch DeepSeek Harness (DSH) as an Agent Client Protocol (ACP) agent for Codeg.

DSH already ships a first-party ACP server (@deepseek-ai/dsh-acp) and a ready app (@deepseek-ai/dsh-acp-demo). This repo wraps them into one installable command (dsh-codeg) that:

• pins the DSH rc line so npx doesn't grab the stale 'latest' tag,
• injects DEEPSEEK_API_KEY from env / .env / ~/.dsh/.env,
• points the app at a bundled cordis.yml by absolute path (Codeg launches the agent with cwd set to the project, so a relative config would never resolve).

Install

Requires Node.js >= 20.

npm install -g @asteroida/dsh-codeg-adapter
# or, once published: npx @asteroida/dsh-codeg-adapter

Set the key:

export DEEPSEEK_API_KEY=sk-...
# or: echo 'DEEPSEEK_API_KEY=sk-...' > ~/.dsh/.env

Register in Codeg

Install dsh-codeg first (global install puts it on PATH; Codeg's launch gate prefers a PATH-resolved command over the npx fallback):

npm install -g @asteroida/dsh-codeg-adapter

Then add it as a custom agent. Three equivalent ways:

1. Form (simplest): Codeg -> Settings -> Custom Agent -> Add, choose the npx channel and fill in package @asteroida/[email protected], command dsh-codeg, args empty, Node >= 20.
2. Paste JSON: paste the contents of codeg-paste.json (the stored CustomAgentDef shape).
3. Registry (after publishing the adapter to the public ACP registry): pick dsh-acp from the catalog (see codeg-agent.json for the registry-entry shape).

In every case, turn off MCP forwarding for this agent (the supports_mcp toggle) — the current DSH ACP bridge rejects session/new.mcpServers and the connection fails otherwise.

Then pick the agent in a conversation and send a prompt. Verified end-to-end up to the LLM call: ACP protocol version is 1 on both sides (Codeg's ProtocolVersion::LATEST = V1, DSH's PROTOCOL_VERSION = 1), and initialize + session/new succeed over stdio.

What works today (automation-only)

• initialize (version negotiation)
• session/new (fresh session, per-session cwd)
• session/prompt (one in-flight prompt per session) -> committed assistant/message text
• per-session cancellation, concurrent sessions, teardown on disconnect
• one-shot session/request_permission (allow-once / reject-once / cancel)

Known gaps (upstream design)

DSH's ACP bridge is deliberately automation-only:

• no session/load / session/resume / session/fork (fresh sessions only; Codeg falls back to fresh sessions since these are not advertised)
• session/new.mcpServers is rejected (hence the supports_mcp=false step)
• only committed text is emitted (no tool traces / diffs / terminal on the ACP wire)
• no commands / modes / model switching / plan review / human elicitation

The gap that matters most for Codeg is MCP. Since the DSH repo does not accept public merges today, the path is to fork @deepseek-ai/dsh-acp (MIT) in this repo and patch newSession to accept mcpServers and wire them into @deepseek-ai/dsh-mcp-client.

Development

npm install
npm run smoke   # boots the ACP server, sends initialize + session/new, prints results

The smoke test does not need a real key (only session/prompt calls the model); it sets a dummy DEEPSEEK_API_KEY so the wrapper's boot path runs unchanged.

边界与非目标（为什么是薄壳，而不是适配器）

本仓库不实现任何 ACP 能力——ACP 能力全部来自上游已发布的 @deepseek-ai/dsh-acp + @deepseek-ai/dsh-acp-demo。本仓库只做打包与启动：锁版本、声明 叶子插件依赖、内置 cordis.yml、绝对路径、key 注入、文档化 supports_mcp=false。

因此没有本仓库 codeg 也能调用 DSH：手动安装 dsh-acp-demo 及 11 个叶子插件、手写 cordis.yml、处理 cwd 与 key，再注册 dsh-acp-demo -c /abs/cordis.yml 即可。本仓库只是 把这串收成一条 npm install + 一次注册。

已知边界（DSH 上游 automation-only 设计，非本仓库可修）

• 无 session/resume / load / fork：在 codeg 里「继续」一段 DSH 对话时，重连后 agent 全新启动、丢失上下文（codeg 只加 continues_from 链接，不重放历史）。同一连接内 的多轮不受影响。
• 无 MCP 转发：必须在 codeg 里关掉 supports_mcp，否则 session/new 会被拒绝。
• 仅提交文本：无 tool 轨迹 / diff / terminal 上 ACP 线。

三条路线的结论

• A（本仓库，现状）：已达成 codeg 一等公民集成，停止于此。codeg 里其他 agent 本身 就能力参差（OpenClaw 无 MCP、Pi 丢弃 MCP、多数无 steering），DSH 的边界是正常光谱。
• B（vendor 桥补 resume / 富 update）：不推荐。resume 收益窄（仅「重连不失忆」），且逆 上游设计方向、需长期维护 fork。若上游将来把 resume 加回 bridge，本仓库自动受益。
• C（补 MCP）：除非有明确刚需，否则不做。需 vendor dsh-acp + dsh-mcp-client （其 startConnection 不导出）+ 用 dsh-scope 做 session 级工具隔离，是一个独立工程。

平台支持

• macOS / Linux：用 cordis.yml（bash 执行器）。
• Windows：wrapper 按 process.platform 自动选 cordis.windows.yml（PowerShell 执行器 dsh-pwsh-sandbox；沙盒 seam 在 Windows 上自动解析到 ACL 受限令牌链）。

启动层（codeg 的 resolve_npx_command + node_required 版本检查 + npm 的 .cmd shim）三端一致， DSH 走 npx 分发，与 Claude/Codex/Gemini 相同。Windows 的 pwsh 组合尚未在真机验证， 需要的 pwsh 依赖（dsh-pwsh-sandbox / dsh-pwsh-local）已加入 package.json。