node-red-contrib-hailo-libero

Node-RED node for Hailo Libero 3.0 hand free trash bin opener for smart home automation.

This package provides Node-RED node to interact with the Hailo Libero 3.0, implementing the session-based HTTP API with auto re-login.

Installation

Standard installation via Node-RED's palette manager or using npm:

npm install @foorschtbar/node-red-contrib-hailo-libero

Usage

After installation, you will find a new node in the Node-RED palette under the category "Hailo". You can use this node to send commands to your Hailo Libero 3.0 device.

Nodes

• Hailo Libero Command: Send commands to the Hailo Libero 3.0 device.

Commands Supported

msg.cmd | msg.payload | Description --------|--------------|------------- push | N/A | Opens the trash bin lid. restart | N/A | Restarts the Hailo Libero device. settings| {'led':2} | Reconfigures the device settings. Send as JSON. For example, adjusts the LED brightness. Other available options are pwr for power and dist for the ejection force and detection range.

Configuration

In the command node, you need to configure the device with the following parameters:

• Host: The IP address or hostname of your Hailo Libero 3.0 device.
• Port: The port number for your Hailo Libero 3.0 device. Default is 81.
• PIN: The PIN for authentication. Default is hailo.

Example Flow

[
    {
        "id": "3e8fa81acf708d83",
        "type": "hailo-libero-command",
        "z": "0114517e3e5588f5",
        "device": "e41f6e86a9a11551",
        "name": "",
        "x": 600,
        "y": 380,
        "wires": [
            [
                "25a580fb6da8421f"
            ]
        ]
    },
    {
        "id": "a506d85dc25a34f7",
        "type": "inject",
        "z": "0114517e3e5588f5",
        "name": "push",
        "props": [
            {
                "p": "cmd",
                "v": "push",
                "vt": "str"
            }
        ],
        "repeat": "",
        "crontab": "",
        "once": false,
        "onceDelay": 0.1,
        "topic": "",
        "x": 330,
        "y": 280,
        "wires": [
            [
                "3e8fa81acf708d83"
            ]
        ]
    },
    {
        "id": "25a580fb6da8421f",
        "type": "debug",
        "z": "0114517e3e5588f5",
        "name": "debug 1",
        "active": true,
        "tosidebar": true,
        "console": false,
        "tostatus": false,
        "complete": "true",
        "targetType": "full",
        "statusVal": "",
        "statusType": "auto",
        "x": 800,
        "y": 380,
        "wires": []
    },
    {
        "id": "f8a31eeec193c2b9",
        "type": "inject",
        "z": "0114517e3e5588f5",
        "name": "",
        "props": [
            {
                "p": "payload"
            },
            {
                "p": "cmd",
                "v": "settings",
                "vt": "str"
            }
        ],
        "repeat": "",
        "crontab": "",
        "once": false,
        "onceDelay": 0.1,
        "topic": "",
        "payload": "{\"led\":2}",
        "payloadType": "json",
        "x": 330,
        "y": 340,
        "wires": [
            [
                "3e8fa81acf708d83"
            ]
        ]
    },
    {
        "id": "db6e84f78ec11f9d",
        "type": "inject",
        "z": "0114517e3e5588f5",
        "name": "",
        "props": [
            {
                "p": "payload"
            },
            {
                "p": "cmd",
                "v": "settings",
                "vt": "str"
            }
        ],
        "repeat": "",
        "crontab": "",
        "once": false,
        "onceDelay": 0.1,
        "topic": "",
        "payload": "{\"led\":7}",
        "payloadType": "json",
        "x": 330,
        "y": 380,
        "wires": [
            [
                "3e8fa81acf708d83"
            ]
        ]
    },
    {
        "id": "05e5f67a5fc17410",
        "type": "inject",
        "z": "0114517e3e5588f5",
        "name": "restart",
        "props": [
            {
                "p": "cmd",
                "v": "restart",
                "vt": "str"
            }
        ],
        "repeat": "",
        "crontab": "",
        "once": false,
        "onceDelay": 0.1,
        "topic": "",
        "x": 330,
        "y": 440,
        "wires": [
            [
                "3e8fa81acf708d83"
            ]
        ]
    },
    {
        "id": "e41f6e86a9a11551",
        "type": "hailo-libero-device",
        "host": "192.168.0.1",
        "port": "81",
        "protocol": "http",
        "debug": false
    },
    {
        "id": "4fb5fa1e9007224a",
        "type": "global-config",
        "env": [],
        "modules": {
            "node-red-contrib-hailo-libero": "1.0.0"
        }
    }
]

Release workflow

• Change the version in package.json
• Update the package-lock.json by running npm install
• Create commit
• Tag the commit with the new version
• Push the commit and the tag to GitHub git push origin main --tags