@loksly/usb-ly
v0.2.4
Published
Node driver for the Thermalright LY USB LCD panels (Trofeo Vision 9.16 and siblings): talks USB from Node, no Python or trcc needed.
Maintainers
Readme
@loksly/usb-ly
A Node.js driver for the Thermalright LY USB LCD panels (Trofeo Vision
9.16 and siblings, USB 0416:5408 / 0416:5409), over libusb. No Python, no
trcc.
import { LyPanel } from '@loksly/usb-ly';
const panel = await LyPanel.open({ serial: '202592047DAE' }); // or no serial: the first one
console.log(panel.info); // { pm: 65, sub: 5, model: { width: 1920, height: 462, rotate: 180 }, … }
const kept = await panel.send(jpegBuffer); // false: the panel dropped it (too big)
await panel.close();- A frame is never silently lost.
sendreads the panel's ACK: byte 8 is 1 when it kept the frame and 2 when it dropped it (the limit is 511 871 bytes). Without that, the write succeeds and the screen keeps the old picture. - Resend an unchanged frame every second or so: the firmware shows the
factory logo again after 2–3 s without one. That is the caller's job
(Kiosko's
usbdriver does it). - A serial that is not found is an error, never "another panel".
protocol.tsis pure (no I/O) and its output is byte-identical to thermalright-trcc-linux 9.12 (the tests compare against vectors generated bytrccitself);transport.tsis the only part that touches libusb.
usb is an optional dependency: on Windows the panel needs the WinUSB driver,
on Linux a udev rule. See docs/usb.md.
Not covered: other Thermalright protocols (SCSI, HID, 320×240), LED control. MIT.
