Garo Wallbox integration for Node-RED

A unofficial Node-RED node for receiving real-time data and controlling your Garo Wallbox.

Usage

Configuration

• Name: Optional name for the node.
• IP Address: The IP address of your Garo Wallbox.
• Interval (s): The interval in seconds at which to fetch data from the wallbox. Minimum interval is 10 seconds.

Inputs

• msg.payload.mode: To change the mode of the wallbox. Accepts "ALWAYS_OFF" or "ALWAYS_ON".
• msg.payload.current_limit: To change the current limit of the wallbox. Accepts values between 6 and 32.

Outputs

• msg.payload: Contains the fetched data and any results from input commands.
  • msg.payload.advanced: The detailed data fetched from the wallbox.
    • meterinfo: Data related to meter information.
    • status: Data related to the status of the wallbox.
    • lbconfig: Data related to load balancing configuration.
  • msg.payload.energy_total: The total energy.
  • msg.payload.current_phase1: The current for phase 1.
  • msg.payload.current_phase2: The current for phase 2.
  • msg.payload.current_phase3: The current for phase 3.
  • msg.payload.current_limit: The current limit.
  • msg.payload.mode: The mode.
  • msg.payload.result: The result of the last HTTP POST request.
  • msg.payload.request: The details of the last HTTP POST request for debugging purposes.

Compatibility

Tested with the Garo/PCE GLBPDC-T222FC wallbox with WiFi module and the following firmware versions:

• Version 1.3.6
• Version 1.3.7

License

This project is licensed under the Apache 2.0 License. See the LICENSE file for details.