@n8n-dev/n8n-nodes-hcloud

Stop writing hcloud API integrations by hand.

Every time you connect n8n to hcloud, you waste hours mapping endpoints, defining parameters, and debugging schemas. You copy-paste from docs, fix edge cases, and pray nothing breaks.

What if connecting n8n to hcloud took 5 minutes, not half a day?

This node gives you 21+ resources out of the box: Actions, Certificates, Datacenters, Firewalls, Floating Ips, and 16 more: with full CRUD operations, typed parameters, and zero manual configuration.

What You Get

• Zero boilerplate: Resources, operations, and fields are pre-configured and ready to use
• Full CRUD: Create, read, update, and delete support where the API allows it
• Typed parameters: No more guessing field types
• Built-in auth: API key authentication, ready to go
• Declarative: Native n8n performance, no custom execute() overhead

Install

npm install @n8n-dev/n8n-nodes-hcloud

Or in n8n:

1. Settings → Community Nodes → Install
2. Search: @n8n-dev/n8n-nodes-hcloud
3. Click Install

Quick Start

1. Install the node (above)
2. Add credentials: hcloud API → paste your API key
3. Drag the hcloud node into your workflow
4. Pick a resource → pick an operation → done.

That's it. No configuration files. No code. It just works.

Resources

• Get multiple Actions
• Get an Action

• Get List Certificates
• Post Create a Certificate
• Delete a Certificate
• Get a Certificate
• Put Update a Certificate
• Get List Actions for a Certificate
• Get an Action for a Certificate
• Post Retry Issuance or Renewal
• Get List Actions
• Get an Action

• Get List Data Centers
• Get a Data Center

• Get List Firewalls
• Post Create a Firewall
• Delete a Firewall
• Get a Firewall
• Put Update a Firewall
• Get List Actions for a Firewall
• Get an Action for a Firewall
• Post Apply to Resources
• Post Remove from Resources
• Post Set Rules
• Get List Actions
• Get an Action

• Get List Floating IPs
• Post Create a Floating IP
• Delete a Floating IP
• Get a Floating IP
• Put Update a Floating IP
• Get List Actions for a Floating IP
• Get an Action for a Floating IP
• Post Assign a Floating IP to a Server
• Post Change reverse DNS records for a Floating IP
• Post Change Floating IP Protection
• Post Unassign a Floating IP
• Get List Actions
• Get an Action

• Get List Images
• Delete an Image
• Get an Image
• Put Update an Image
• Get List Actions for an Image
• Get an Action for an Image
• Post Change Image Protection
• Get List Actions
• Get an Action

• Get List ISOs
• Get an ISO

• Get List Load Balancer Types
• Get a Load Balancer Type

• Get List Load Balancers
• Post Create a Load Balancer
• Delete a Load Balancer
• Get a Load Balancer
• Put Update a Load Balancer
• Get List Actions for a Load Balancer
• Get an Action for a Load Balancer
• Post Add Service
• Post Add Target
• Post Attach a Load Balancer to a Network
• Post Change Algorithm
• Post Change reverse DNS entry for this Load Balancer
• Post Change Load Balancer Protection
• Post Change the Type of a Load Balancer
• Post Delete Service
• Post Detach a Load Balancer from a Network
• Post Disable the public interface of a Load Balancer
• Post Enable the public interface of a Load Balancer
• Post Remove Target
• Post Update Service
• Get Metrics for a LoadBalancer
• Get List Actions
• Get an Action

• Get List Locations
• Get a Location

• Get List Networks
• Post Create a Network
• Delete a Network
• Get a Network
• Put Update a Network
• Get List Actions for a Network
• Get an Action for a Network
• Post Add a route to a Network
• Post Add a subnet to a Network
• Post Change IP range of a Network
• Post Change Network Protection
• Post Delete a route from a Network
• Post Delete a subnet from a Network
• Get List Actions
• Get an Action

• Get List Placement Groups
• Post Create a PlacementGroup
• Delete a PlacementGroup
• Get a PlacementGroup
• Put Update a PlacementGroup

• Get all prices

• Get List Primary IPs
• Post Create a Primary IP
• Delete a Primary IP
• Get a Primary IP
• Put Update a Primary IP
• Get List Actions for a Primary IP
• Get an Action for a Primary IP
• Post Assign a Primary IP to a resource
• Post Change reverse DNS records for a Primary IP
• Post Change Primary IP Protection
• Post Unassign a Primary IP from a resource
• Get List Actions
• Get an Action

• Get List Server Types
• Get a Server Type

• Get List Servers
• Post Create a Server
• Delete a Server
• Get a Server
• Put Update a Server
• Get List Actions for a Server
• Get an Action for a Server
• Post Add a Server to a Placement Group
• Post Attach an ISO to a Server
• Post Attach a Server to a Network
• Post Change alias IPs of a Network
• Post Change reverse DNS entry for this Server
• Post Change Server Protection
• Post Change the Type of a Server
• Post Create Image from a Server
• Post Detach a Server from a Network
• Post Detach an ISO from a Server
• Post Disable Backups for a Server
• Post Disable Rescue Mode for a Server
• Post Enable and Configure Backups for a Server
• Post Enable Rescue Mode for a Server
• Post Power off a Server
• Post Power on a Server
• Post Soft reboot a Server
• Post Rebuild a Server from an Image
• Post Remove from Placement Group
• Post Request Console for a Server
• Post Reset a Server
• Post Reset root Password of a Server
• Post Shutdown a Server
• Get Metrics for a Server
• Get List Actions
• Get an Action

• Get List SSH keys
• Post Create an SSH key
• Delete an SSH key
• Get a SSH key
• Put Update an SSH key

• Get List Storage Box Types
• Get a Storage Box Type

• Get List Storage Boxes
• Post Create a Storage Box
• Get List Actions
• Get an Action
• Delete a Storage Box
• Get a Storage Box
• Put Update a Storage Box
• Get List Actions for a Storage Box
• Post Change Protection
• Post Change Type
• Post Disable Snapshot Plan
• Post Enable Snapshot Plan
• Post Reset Password
• Post Rollback Snapshot
• Post Update Access Settings
• Get an Action for a Storage Box
• Get List folders of a Storage Box
• Get List Snapshots
• Post Create a Snapshot
• Delete a Snapshot
• Get a Snapshot
• Put Update a Snapshot
• Get List Subaccounts
• Post Create a Subaccount
• Delete a Subaccount
• Get a Subaccount
• Put Update a Subaccount
• Post Change Home Directory
• Post Reset Password
• Post Update Access Settings

• Get List Volumes
• Post Create a Volume
• Delete a Volume
• Get a Volume
• Put Update a Volume
• Get List Actions for a Volume
• Get an Action for a Volume
• Post Attach Volume to a Server
• Post Change Volume Protection
• Post Detach Volume
• Post Resize Volume
• Get List Actions
• Get an Action

• Get List Zones
• Post Create a Zone
• Get List Actions
• Get an Action
• Delete a Zone
• Get a Zone
• Put Update a Zone
• Get List Actions for a Zone
• Post Change a Zone s Primary Nameservers
• Post Change a Zone s Protection
• Post Change a Zone s Default TTL
• Post Import a Zone file
• Get an Action for a Zone
• Get List RRSets
• Post Create an RRSet
• Delete an RRSet
• Get an RRSet
• Put Update an RRSet
• Post Add Records to an RRSet
• Post Change an RRSet s Protection
• Post Change an RRSet s TTL
• Post Remove Records from an RRSet
• Post Set Records of an RRSet
• Post Update Records of an RRSet
• Get Export a Zone file

Why This Node?

Without this node:

• Hours of manual API integration
• Copy-pasting from hcloud docs
• Debugging auth, pagination, error handling
• Maintaining your own client code

With this node:

• Install → configure → use. 5 minutes.
• Auto-generated from the official hcloud OpenAPI spec
• Always up to date when the API changes
• Native n8n performance

Auto-Generated

This node was auto-generated from the official hcloud OpenAPI specification using @n8n-dev/n8n-openapi-node-ultimate, then validated against the live API so you get accurate types and real parameters, not guesswork.

When the hcloud API updates, this node updates too.

License

MIT © kelvinzer0