Gitee AI 员工 (gitee-ai-employee)

An issue-driven AI developer for DeepSeek Harness, working against Gitee (码云) and GitHub.

Mention your bot in an issue, and the plugin clones the repository, dispatches an AI worker agent to implement the change, pushes a branch, opens a Pull Request to the branch you ask for, and can auto-merge and auto-close the issue. You can watch Gitee and GitHub repositories at the same time.

中文说明见 README.zh.md。

What it does

• Polling: periodically scans the issues of the repositories you watch for a new mention of your bot (@botName). Dual platform: each watch row can be prefixed gitee: or github: (unprefixed rows use defaultPlatform, default gitee), so you can watch both platforms at once.
• AI development: creates a worker agent in a profile that clones the repo (via PowerShell + curl on Windows), explores it, implements the issue, runs checks, and commits on a ai-fix/issue-<number> branch.
• Branch-aware: it reads branch instructions written in natural language and uses that branch as both the development base and the PR target:
  • 需要修改 release-v1.2 分支 / 修改 X 分支 / 改 X 分支
  • 基于 X 分支 / 在 X 分支上 / 以 X 分支为基础
  • 合并到 X / 合到 X / 目标分支 X / base: X The requested branch is validated against the remote with git ls-remote; if it does not exist, the plugin falls back to the repository default branch and says so in a comment.
• PR & close: pushes the branch, creates a PR (base = the chosen branch), optionally auto-merges it (autoMerge), and optionally closes the issue on success (autoCloseIssue).
• Webhook / manual trigger: optional webhook endpoint and a manual trigger URL for instant processing without waiting for the poll.
• Security scanning (v1.2): configure scan repositories (scanRepos) and the plugin drives a scan worker (reusing the DSH model) through built-in/custom security prompts to statically audit the cloned code. Findings are deduplicated — the same spot (file:line + vulnerability type) is only reported once (dedup state persists at workRoot/scan-state.json) — and new findings are submitted as issues automatically. Supports scheduled scanning (scanEnabled + scanIntervalMs) and manual triggering (the "立即扫描" button in the settings card or POST /gitee-ai/scan).

Requirements

• DeepSeek Harness (dsh) 0.1.x, Windows (the plugin drives git and the Gitee API through PowerShell + C:\Windows\System32\curl.exe), a Gitee account with a personal access token.
• The worker and scanner presets are bundled and auto-installed into $DSH_HOME/.agent-presets/gitee-worker (gitee-scanner likewise) on first load — no manual setup.

Install

dsh plugin --profile <your-profile> add gitee-ai-employee

(or if you prefer installing straight from GitHub: dsh plugin --profile <p> add github:wangbobo-coder/gitee-ai-employee)

Restart dsh, then open Settings → Plugins → Plugin configuration, find the Gitee AI 员工 card and configure:

| Setting | Meaning | | --- | --- | | giteeToken | Gitee personal access token (kept secret; never returned by the status API) | | githubToken | GitHub personal access token, optional (kept secret; only needed for github: repos) | | defaultPlatform | Platform for unprefixed watchRepos rows: gitee (default) or github | | botName | The account/issues mention that triggers the bot, e.g. gitee-ai. ASCII is recommended. | | workRoot | Where repositories are cloned; empty = $DSH_HOME/gitee-workers | | watchRepos | Repos to poll, one per line: owner/repo (uses defaultPlatform) or gitee:owner/repo / github:owner/repo | | pollEnabled / pollIntervalMs | Poll on/off and interval (milliseconds) | | autoMerge | Auto-merge the created PR | | autoCloseIssue | Close the issue once the task succeeds | | workerPreset | Agent preset id used for the worker (default gitee-worker) | | scanEnabled | Enable scheduled security scanning of scanRepos | | scanRepos | Repos to scan, one per line: owner/repo with optional gitee:/github: prefix | | scanMinSeverity | Minimum severity to report: critical/high/medium/low/none (default medium) | | scanOneIssuePerRun | true = one consolidated issue per run (default); false = one issue per finding | | scanPrompts | Custom/override prompts {id:{name,prompt}} (same id overrides a built-in) | | scanIntervalMs | Scheduled scan interval (default 21600000 = 6 h) | | scanConcurrency | Max repos scanned in parallel (1–8, default 3); a long scanRepos list queues up and keeps scanning until every repo is done |

Usage

1. Make sure pollEnabled is on (or use the manual trigger URL shown in the status API).
2. Open (or edit) an issue in a watched repo and mention your bot:

   @gitee-ai
   需要修改 release-v1.2 分支
   参会人员选择增加学生选项，注意回显处理。

3. The plugin picks it up (usually within one poll interval), comments "已接单", runs the worker, and later posts the result with the PR link. With autoCloseIssue on, the issue is closed on success.

For GitHub repos the same flow applies — just configure githubToken and add the repo as github:owner/repo in watchRepos (or set defaultPlatform to github). For one-off runs you can also trigger directly:

http://<dsh-host>:<port>/gitee-ai/go?platform=github&owner=octo&repo=hello&number=5

The bot name match uses a lookahead ((?![A-Za-z0-9_])) so both ASCII and CJK bot names trigger correctly.

Security scanning (v1.2)

1. In the plugin config card (or /gitee-ai/settings), fill 扫描仓库 with one [gitee:|github:]owner/repo per line, enable 启用定时扫描, or click 立即扫描全部仓库. Click 一键获取我的仓库 to auto-fill every repo you can access (own + org memberships) so you can keep/remove entries before saving (equivalent API: GET /gitee-ai/my-repos).
2. The plugin clones the repo → runs the scan worker with the selected security prompts → results land at <repo>/.gitee-scan/result.json → findings are diffed against scan-state.json → new findings are submitted as an issue.

Built-in prompt ids: general / sqli / xss / command-injection / path-traversal / ssrf / hardcoded-secret / insecure-deserialization / authz / dos / dependency.

• Override a built-in by using the same id in scanPrompts; add custom ids for new checks.
• Dedup signature is file:line:vulnType; already-reported signatures are skipped.
• POST /gitee-ai/scan accepts dryRun=true (preview, no issue) and force=true (re-report).
• GET /gitee-ai/scan returns the prompt catalog, scan jobs and dedup stats.
• Scan issues are titled with a [安全扫描] prefix.

Security notes

• User configuration is persisted to the user's own profile patch layer; the shipped cordis.patch.yml contains only an empty default and never a token.
• The token is marked secret in the schema and is never echoed by the status/config API (only a tokenConfigured boolean).
• The plugin runs with the same privileges as your dsh process; its worker agent gets danger-full-access inside the cloned workspace only.
• The scan worker is read-only static analysis; hardcoded-secret findings report type and location only, never the secret value.

Development

• dsh/index.js — host plugin (Cordis object plugin with dsh.bundle manifest).
• dsh/client.js — web client half (settings card hover/status).
• preset/gitee-worker/ — the bundled worker agent preset, auto-copied to $DSH_HOME/.agent-presets/gitee-worker on load if missing.

License

MIT