homebridge-linux-temperature-fwp

A homebridge temperature sensor for Firewalla Purple Linux temperatures. Based on the fork by Chris Jones at https://github.com/cmsj/homebridge-linux-temperature Based on the fork by Peter Harry at https://github.com/GreyPeter/homebridge-pi-lm75 Based on origial code by Mark Webb-Johnson [email protected]. See original code here: https://github.com/markwj/homebridge-pi

Installation

1. Install Homebridge using: npm install -g homebridge
2. Install this plugin using: npm install -g homebridge-linux-temperature-fwp
3. Update your Homebridge config.json using the sample below.

Configuration

{
  "accessory": "LinuxTemperature",
  "name": "Core 0 Temperature",
  "sensor_path": "/sys/class/thermal/thermal_zone0/temp",
  "divisor": 1000
},
{
  "accessory": "LinuxTemperature",
  "name": "Core 1 Temperature",
  "sensor_path": "/sys/class/thermal/thermal_zone1/temp",
  "divisor": 1000
}

Fields:

• accessory must be "LinuxTemperature" (required).
• name is the name of the published accessory (required).
• sensor_path is the path to a file (typically in /sys or /proc that contains just the temperature value (required).
• divisor is the amount to divide the temperature value by (e.g. typically Linux provides milli-degrees, so a divisor of 1000 gives degrees)