homebridge-melcloud-external-sensor

v1.0.4

Published

a month ago

Homebridge plugin to control Mitsubishi Air Conditioner with external temperature sensor support (Shelly). Fork of homebridge-melcloud-control by grzegorz914.

0High
0Medium
0Low

mslavov

homebridge homebridge-plugin homekit mitsubishi melcloud shelly external-sensor temperature-compensation

MELCloud Control

Homebridge plugin for Air Conditioner, Heat Pump and Energy Recovery Ventilation Lossnay, manufactured by Mistsubishi and connected to MELCloud or MELCloud Home.

Package Requirements

| Package | Installation | Role | Required | | --- | --- | --- | --- | | Homebridge v2.0.0 | Homebridge Wiki | HomeKit Bridge | Required | | Homebridge UI <= v5.5.0 | Homebridge UI Wiki | Homebridge User Interface | Required | | MELCloud | Plug-In Wiki | Plug-In | Required |

About The Plugin

Support:
- Devices connected to MELCloud or MELCloud Home.
- Multiple accounts, buildings, floors, areas.
- Temperature display units Celsius/Fahrenheit.
- Assing individual operating mode for Heat/Cool/Auto.
- Presets, only MELCloud.
- Scenes, only MELCloud Home.
- Frost protection, only MELCloud Home.
- Overheat Protection, only MELCloud Home.
- Holiday Mode, only MELCloud Home.
- Physical lock controls LOCK/UNLOCK, only MELCloud.
- Functions, using extra Buttons, switch to OFF restore previous state.
- Automations, shortcuts and Siri.
- External integrations, RESTFul, MQTT.
Control devices over local network You need use ESP module and Tasmota Control plugin.

Control Mode

Air Conditioner:
- Heater Cooler:
  - Power ON/OFF.
  - Operating mode AUTO/HEAT/COOL/POWER OFF.
  - Temperature HEATING/COOLING/AUTO.
  - Fan speed OFF/1/2/3/4/5/AUTO.
  - Swing mode AUTO/SWING.
  - Physical lock controls LOCK/UNLOCK.
  - Temperature display unit °F/°C.
- Thermostat:
  - Power ON/OFF.
  - Operating mode POWER OFF/HEAT/COOL/AUTO.
  - Temperature HEATING/COOLING/AUTO.
  - Temperature display unit °F/°C.
- Buttons:
  - For direct device control.
    - Power ON/OFF.
    - Operating mode HEAT/DRY/COOL/FAN/AUTO.
    - Physical lock controls LOCK/UNLOCK
    - Vane H mode AUTO/1/2/3/4/5/SPLIT/SWING.
    - Vane V mode AUTO/1/2/3/4/5/SWING.
    - Fan speed mode AUTO/1/2/3/4/5.
    - Preset SET/UNSET
    - Frost protection ON/OFF/MINTEMP/MAXTEMP.
    - Overheat protection ON/OFF/MINTEMP/MAXTEMP.
    - Holiday mode ON/OFF.
    - Schedules ON/OFF.
    - Scene ON/OFF.
- Sensors:
  - For automation and notifications.
    - Power ON/OFF.
    - Operating mode HEAT/DRY/COOL/FAN/AUTO.
    - Physical lock controls LOCK/UNLOCK.
    - Vane H mode AUTO/1/2/3/4/5/SPLIT/SWING.
    - Vane V mode AUTO/1/2/3/4/5/SWING.
    - Fan speed mode AUTO/1/2/3/4/5/.
    - Preset ACTIV/UNACTIV.
    - Room temperature.
    - Outdoor temperature.
    - Frost protection.
    - Overheat protection.
    - Holiday mode.
    - Shedules control.
    - Shedule active.
    - Scene control.
    - In standby.
    - Is connected.
    - Error.
Heat Pump:
- Heater Cooler:
  - Heat Pump:
    - Power ON/OFF.
    - Operating mode HEAT/COOL.
    - Outdoor temperature GET.
    - Physical lock controls all Zones and Hot Water Tank LOCK/UNLOCK.
    - Temperature display unit °F/°C.
  - Zone 1 and 2:
    - Operating mode heat AUTO/HEAT/COOL - CURVE/HEAT THERMOSTAT/HEAT FLOW.
    - Operating mode cool HEAT/COOL - COOL THERMOSTAT/COOL FLOW.
    - Temperature HEATING/COOLING.
    - Physical lock controls LOCK/UNLOCK.
  - Hot Water Tank:
    - Operating mode AUTO/HEAT - AUTO/HEAT NOW.
    - Temperature SET/GET.
    - Physical lock controls LOCK/UNLOCK.
- Thermostat:
  - Heat Pump:
    - Power ON/OFF.
    - Operating mode HEAT/COOL.
    - Outdoor temperature GET.
    - Temperature display unit °F/°C.
  - Zone 1 and 2:
    - Operating mode heat HEAT/COOL/AUTO - HEAT THERMOSTAT/HEAT FLOW/CURVE.
    - Operating mode cool HEAT/COOL - COOL THERMOSTAT/COOL FLOW.
    - Temperature HEATING/COOLING.
  - Hot Water Tank:
    - Operating mode HEAT/AUTO - HEAT NOW, AUTO.
    - Temperature SET/GET.
- Buttons:
  - For direct device control.
    - Power ON/OFF.
    - Operating mode HEAT/COOL/CURVE/HOLIDAY/AUTO HOT WATER/ECO HOT WATER/FORCE HOT WATER.
    - Physical lock controls LOCK/UNLOCK.
    - Preset SET/UNSET.
    - Frost protection ON/OFF/MINTEMP/MAXTEMP.
    - Holiday mode ON/OFF.
    - Schedules ON/OFF.
    - Scene ON/OFF.
- Sensors:
  - For automation and notifications.
    - Power ON/OFF.
    - Operating mode HEAT/COOL/CURVE/HOLIDAY/AUTO HOT WATER/ECO HOT WATER/FORCE HOT WATER.
    - Physical lock controls LOCK/UNLOCK.
    - Preset ACTIV/UNACTIV.
    - Outdoor temperature.
    - Zone 1 temperature.
    - Zone 2 temperature.
    - Water tank temperature.
    - Flow Temperature Zone 1, 2, Hot Water.
    - Return Temperature Zone 1, 2, Hot Water.
    - Frost protection.
    - Holiday mode.
    - Shedules control.
    - Shedule active.
    - Scene control.
    - In standby.
    - Is connected.
    - Error.
Energy Recovery Ventilation Lossnay:
- Heater Cooler:
  - Power ON/OFF.
  - Operating mode AUTO/HEAT/COOL/POWER OFF - AUTO, LOSSNAY, BYPASS, POWER OFF.
  - Fan speed OFF/1/2/3/4/AUTO.
  - Temperature display unit °F/°C.
- Thermostat:
  - Power ON/OFF.
  - Operating mode POWER OFF/HEAT/COOL/AUTO - POWER OFF, LOSSNAY, BYPASS, AUTO.
  - Temperature display unit °F/°C.
- Buttons:
  - For direct device control.
    - Power ON/OFF.
    - Operating mode LOSSNAY/BYPASS/AUTO/NIGHT PURGE.
    - Fan speed mode AUTO/1/2/3/4.
    - Preset SET/UNSET.
    - Holiday mode ON/OFF.
    - Schedules ON/OFF.
    - Scene ON/OFF.
- Sensors:
  - For automation and notifications.
    - Power ON/OFF.
    - Operating mode LOSSNAY/BYPASS/AUTO/NIGHT PURGE.
    - Fan speed mode AUTO/1/2/3/4.
    - Presets ACTIV/UNACTIV.
    - Room temperature.
    - Outdoor temperature.
    - Supply temperature.
    - Core maintenance.
    - Filter maintenance.
    - CO2 detected and level.
    - PM2.5 air quality and level.
    - Holiday mode.
    - Shedules control.
    - Shedule active.
    - Scene control.
    - In standby.
    - Is connected.
    - Error.

HOME app current device mode display

In AUTO mode, the tile display current state based on current mode:
- HEATING mode, th tile display current state as HEATING - orange
- COOLING mode, the tile display current state as COOLING - blue
- DRY mode, the tile display current state as IDLE - black
- FAN mode, the tile display current state as IDLE - black
- IDLE mode, the tile display current state as IDLE - black
- INACTIVE mode, the tile display current state as INACTIVE - transparent

AUTO Mode

Heather/Cooler
- In this mode we can set heathing threshold and cooling threshold temperature:
- Target temperature is calculated as a middle value between LO and HI and the rest is calculated internally.
Thermostat
- In this mode we can set only target temperature:
- Target temperature is send to device and calculated internally:
Calculation method in device internally:
- If the room temperature < Heating Setpoint, the unit will be set to HEAT with a setpoint of 23°C.
- In HEAT, if the room temperature > Heating Setpoint + 1°C, the unit will be set to FAN.
- In FAN, if the room temperature > Cooling Setpoint, the unit will be set to COOL with a setpoint of 19°C.
- In COOL, if the room temperature < Cooling Setpoint - 1°C, the unit will be set to FAN.
- In FAN, if the room temperature < Heating Setpoint, the unit will be set to HEAT with a setpoint of 23°C.
The image shows Heating Setpoint of 19°C and a Cooling Setpoint of 23°C.

Configuration

Run this plugin as a Child Bridge (Highly Recommended), this prevent crash Homebridge if plugin crashes.
Install and use Homebridge UI <= v5.5.0 to configure this plugin.
The sample-config.json can be edited and used as an alternative.

| Key | Description | | --- | --- | | name | Here set the own account name. | | user | Here set the account credential (username). | | passwd | Here set the account credential (password). | | language | Here select the account language. | | type | Here select the account type 0 - None / Disabled, 1 - MELCloud, 2 - MELCloud Home. | | ataDevices[] | Array of ATA devices created automatically after login to MELCloud from plugin config UI. | | ataDevices[].id | Read only data, do not change it. | | ataDevices[].type | Read only data, do not change it. | | ataDevices[].name | Here set Your own name Accessory Name which is exposed to the Homebridge / HomeKit. | | ataDevices[].displayType | Here select device control mode 0 - None / Disabled, 1 - Heater / Cooler, 2 - Thermostat. | | ataDevices[].heatDryFanMode | Here select the operatiing mode for Heat, if this mode is not supported, it will be disabled. | | ataDevices[].coolDryFanMode | Here select the operatiing mode for Cool, if this mode is not supported, it will be disabled. | | ataDevices[].autoDryFanMode | Here select the operatiing mode for Auto, if this mode is not supported, it will be disabled.. | | ataDevices[].temperatureSensor | This enable extra Room temperature sensor and use in HomeKit automations. | | ataDevices[].temperatureOutdoorSensor | This enable extra Outdoor temperature sensor and use in HomeKit automations. | | ataDevices[].inStandbySensor | This enable In Standby Mode sensor and use in HomeKit automations. | | ataDevices[].connectSensor | This enable Connect State sensor and use in HomeKit automations. | | ataDevices[].errorSensor | This enable Error sensor and use in HomeKit automations. | | ataDevices[].frostProtectionSupport | This enable extra Frost Protection control and sensors and use in HomeKit automations. | | ataDevices[].overheatProtectionSupport | This enable extra Overheat Protection control and sensors and use in HomeKit automations. | | ataDevices[].holidayModeSupport | This enable extra Holiday Mode control and sensors and use in HomeKit automations. | | ataDevices[].presets[] | Array of ATA device Presets created automatically after login to MELCloud from plugin config UI. | | ataDevices[].presets[].id | Read only data, do not change it. | | ataDevices[].presets[].name | Here set Your own name Preset Name which is exposed to the Homebridge / HomeKit. | | ataDevices[].presets[].displayType | Here select display type in HomeKit, 0 - None / Disabled, 1 - Motion Sensor, 2 - Occupancy Sensor, 3 - Contact Sensor, 4 - Switch + Motion Sensor, 5 - Switch + Occupancy Sensor, 6 - Switch + Contact Sensor, 7 - Switch. | | ataDevices[].schedules[] | Array of ATA device Schedules created automatically after login to MELCloud Home from plugin config UI. | | ataDevices[].schedules[].id | Read only data, do not change it. | | ataDevices[].schedules[].name | Here set Your own name Schedule Name which is exposed to the Homebridge / HomeKit. | | ataDevices[].schedules[].displayType | Here select display type in HomeKit, 0 - None / Disabled, 1 - Motion Sensor, 2 - Occupancy Sensor, 3 - Contact Sensor, 4 - Switch + Motion Sensor, 5 - Switch + Occupancy Sensor, 6 - Switch + Contact Sensor, 7 - Switch. | | ataDevices[].scenes[].id | Read only data, do not change it. | | ataDevices[].scenes[].name | Here set Your own name Scene Name which is exposed to the Homebridge / HomeKit. | | ataDevices[].scenes[].displayType | Here select display type in HomeKit, 0 - None / Disabled, 1 - Motion Sensor, 2 - Occupancy Sensor, 3 - Contact Sensor, 4 - Switch + Motion Sensor, 5 - Switch + Occupancy Sensor, 6 - Switch + Contact Sensor, 7 - Switch. | | ataDevices[].buttonsSensors[] | Array of buttons sensors. | | ataDevices[].buttonsSensors[].name | Here set Button Name which You want expose to the Homebridge / HomeKit. | | ataDevices[].buttonsSensors[].mode | Here select button mode, VH - Vane Horizontal, VV - Vane Horizontal. | | ataDevices[].buttonsSensors[].displayType | Here select display type in HomeKit, 0 - None / Disabled, 1 - Motion Sensor, 2 - Occupancy Sensor, 3 - Contact Sensor, 4 - Switch + Motion Sensor, 5 - Switch + Occupancy Sensor, 6 - Switch + Contact Sensor, 7 - Switch. | | ataDevices[].buttonsSensors[].namePrefix | Here enable the accessory name as a prefix for button / sensor name. | | atwDevices[] | Array of ATA devices created automatically after login to MELCloud from plugin config UI. | | atwDevices[].id | Read only data, do not change it. | | atwDevices[].type | Read only data, do not change it. | | atwDevices[].name | Here set Your own name Accessory Name which is exposed to the Homebridge / HomeKit. | | atwDevices[].displayType | Here select main control mode None / Disabled, Heater / Cooler, Thermostat. | | atwDevices[].hideZone | Here select which zone need to be hidden None / Disabled, Heat Pump, Heat Pump / Zone 1, Heat Pump / Zone 1 / Hot Water, Heat Pump / Zone 1 / Zone 2, Heat Pump / Hot Water,Heat Pump / Hot Water / Zone 2, Heat Pump / Zone 2, Zone 1, Zone 1 / Hot Water, Zone 1 / Hot Water / Zone 2, Zone 1 / Zone 2, Hot Water, Hot Water / Zone 2, Zone 2, All. | | atwDevices[].temperatureSensor | This enable extra Room temperature sensor and use in HomeKit automations. | | atwDevices[].temperatureFlowSensor | This enable extra Flow temperature sensor and use in HomeKit automations. | | atwDevices[].temperatureReturnSensor | This enable extra Return temperature sensor and use in HomeKit automations. | | atwDevices[].temperatureFlowZone1Sensor | This enable extra Flow Zone 1 temperature sensor and use in HomeKit automations. | | atwDevices[].temperatureReturnZone1Sensor | This enable extra Return Zone 1 temperature sensor and use in HomeKit automations. | | atwDevices[].temperatureFlowWaterTankSensor | This enable extra Flow Water Tank temperature sensor and use in HomeKit automations. | | atwDevices[].temperatureReturnWaterTankSensor | This enable extra Return Water Tank temperature sensor and use in HomeKit automations. | | atwDevices[].temperatureFlowZone2Sensor | This enable extra Flow Zone 2 temperature sensor and use in HomeKit automations. | | atwDevices[].temperatureReturnZone2Sensor | This enable extra Return Zone 2 temperature sensor and use in HomeKit automations. | | atwDevices[].inStandbySensor | This enable In Standby Mode sensor and use in HomeKit automations. | | atwDevices[].connectSensor | This enable Connect State sensor and use in HomeKit automations. | | atwDevices[].errorSensor | This enable Error sensors and use in HomeKit automations. | | atwDevices[].holidayModeSupport | This enable extra Holiday Mode control and sensors and use in HomeKit automations. | | atwDevices[].presets[] | Array of ATW device Presets created automatically after login to MELCloud from plugin config UI. | | atwDevices[].presets[].id | Read only data, do not change it. | | atwDevices[].presets[].name | Here set Your own name Preset Name which is exposed to the Homebridge/HomeKit. | | atwDevices[].presets[].displayType | Here select display type in HomeKit, 0 - None/Disabled, 1 - Motion Sensor, 2 - Occupancy Sensor, 3 - Contact Sensor, 4 - Switch + Motion Sensor, 5 - Switch + Occupancy Sensor, 6 - Switch + Contact Sensor, 7 - Switch. | | atwDevices[].schedules[] | Array of ATW device Schedules created automatically after login to MELCloud Home from plugin config UI. | | atwDevices[].schedules[].id | Read only data, do not change it. | | atwDevices[].schedules[].name | Here set Your own name Schedule Name which is exposed to the Homebridge/HomeKit. | | atwDevices[].schedules[].displayType | Here select display type in HomeKit, 0 - None/Disabled, 1 - Motion Sensor, 2 - Occupancy Sensor, 3 - Contact Sensor, 4 - Switch + Motion Sensor, 5 - Switch + Occupancy Sensor, 6 - Switch + Contact Sensor, 7 - Switch. | | atwDevices[].scenes[].id | Read only data, do not change it. | | atwDevices[].scenes[].name | Here set Your own name Scene Name which is exposed to the Homebridge/HomeKit. | | atwDevices[].scenes[].displayType | Here select display type in HomeKit, 0 - None/Disabled, 1 - Motion Sensor, 2 - Occupancy Sensor, 3 - Contact Sensor, 4 - Switch + Motion Sensor, 5 - Switch + Occupancy Sensor, 6 - Switch + Contact Sensor, 7 - Switch. | | atwDevices[].buttonsSensors[] | Array of buttons sensors. | | atwDevices[].buttonsSensors[].name | Here set Button Name which You want expose to the Homebridge / HomeKit. | | atwDevices[].buttonsSensors[].mode | Here select button mode. | | atwDevices[].buttonsSensors[].displayType | Here select display type in HomeKit, 0 - None / Disabled, 1 - Motion Sensor, 2 - Occupancy Sensor, 3 - Contact Sensor, 4 - Switch + Motion Sensor, 5 - Switch + Occupancy Sensor, 6 - Switch + Contact Sensor, 7 - Switch. | | atwDevices[].buttonsSensors[].namePrefix | Here enable the accessory name as a prefix for button / sensor name. | | ervDevices[] | Array of ATA devices created automatically after login to MELCloud from plugin config UI. | | ervDevices[].id | Read only data, do not change it. | | ervDevices[].type | Read only data, do not change it. | | ervDevices[].name | Here set Your own name Accessory Name which is exposed to the Homebridge / HomeKit. | | ervDevices[].displayType | Here select main control mode None / Disabled, Heater / Cooler, Thermostat. | | ervDevices[].temperatureSensor | This enable extra Room temperature sensor and use in HomeKit automations. | | ervDevices[].temperatureOutdoorSensor | This enable extra Outdoor temperature sensor and use in HomeKit automations. | | ervDevices[].temperatureSupplySensor | This enable extra Supply temperature sensor and use in HomeKit automations. | | atwDevices[].inStandbySensor | This enable In Standby Mode sensor and use in HomeKit automations. | | ervDevices[].connectSensor | This enable Connect State sensor and use in HomeKit automations. | | ervDevices[].errorSensor | This enable Error sensors and use in HomeKit automations. | | ervDevices[].holidayModeSupport | This enable extra Holiday Mode control and sensors and use in HomeKit automations. | | ervDevices[].presets[] | Array of ERV device Presets created automatically after login to MELCloud from plugin config UI. | | ervDevices[].presets[].id | Read only data, do not change it. | | ervDevices[].presets[].name | Here set Your own name Preset Name which is exposed to the Homebridge / HomeKit. | | ervDevices[].presets[].displayType | Here select display type in HomeKit, 0 - None / Disabled, 1 - Motion Sensor, 2 - Occupancy Sensor, 3 - Contact Sensor, 4 - Switch + Motion Sensor, 5 - Switch + Occupancy Sensor, 6 - Switch + Contact Sensor, 7 - Switch. | | ervDevices[].schedules[] | Array of ERV device Schedules created automatically after login to MELCloud Home from plugin config UI. | | ervDevices[].schedules[].id | Read only data, do not change it. | | ervDevices[].schedules[].name | Here set Your own name Schedule Name which is exposed to the Homebridge / HomeKit. | | ervDevices[].schedules[].displayType | Here select display type in HomeKit, 0 - None / Disabled, 1 - Motion Sensor, 2 - Occupancy Sensor, 3 - Contact Sensor, 4 - Switch + Motion Sensor, 5 - Switch + Occupancy Sensor, 6 - Switch + Contact Sensor, 7 - Switch. | | ervDevices[].scenes[].id | Read only data, do not change it. | | ervDevices[].scenes[].name | Here set Your own name Scene Name which is exposed to the Homebridge / HomeKit. | | ervDevices[].scenes[].displayType | Here select display type in HomeKit, 0 - None / Disabled, 1 - Motion Sensor, 2 - Occupancy Sensor, 3 - Contact Sensor, 4 - Switch + Motion Sensor, 5 - Switch + Occupancy Sensor, 6 - Switch + Contact Sensor, 7 - Switch. | | ervDevices[].buttonsSensors[] | Array of buttons sensors. | | ervDevices[].buttonsSensors[].name | Here set Button Name which You want expose to the Homebridge / HomeKit. | | ervDevices[].buttonsSensors[].mode | Here select button mode. | | ervDevices[].buttonsSensors[].displayType | Here select display type in HomeKit, 0 - None / Disabled, 1 - Motion Sensor, 2 - Occupancy Sensor, 3 - Contact Sensor, 4 - Switch + Motion Sensor, 5 - Switch + Occupancy Sensor, 6 - Switch + Contact Sensor, 7 - Switch. | | ervDevices[].buttonsSensors[].namePrefix | Here enable the accessory name as a prefix for button / sensor name. | | refreshInterval | Here set the background account data refresh time in (sec) , only for old MELCLoud, default 120s. | | log{} | Log object. | | log.deviceInfo | This enable log device info will be displayed by every connections device to the network. | | log.success | This enable success log will be displayed in console. | | log.info | This enable info log will be displayed in console. | | log.warn | This enable warn log will be displayed in console. | | log.error | This enable error log will be displayed in console. | | log.debug | This enable debug log will be displayed in console. | | restFul{} | RSTful object. | | restFul.enable | This enable RESTful server will start automatically and respond to any path request. | | mqtt{} | MQTT object. | | mqtt.enable | This enable MQTT Broker will start automatically and publish all awailable PV data. | | mqtt.host | Here set the IP Address or Hostname for MQTT Broker. | | mqtt.port | Here set the Port for MQTT Broker, default 1883. | | mqtt.clientId | Here optional set the Client Id of MQTT Broker. | | mqtt.prefix | Here set the Prefix for Topic or leave empty. | | mqtt.auth{} | MQTT authorization object. | | mqtt.auth.enable | Here enable authorization for MQTT Broker. | | mqtt.auth.user | Here set the MQTT Broker user. | | mqtt.auth.passwd | Here set the MQTT Broker password. |

RESTful Integration

Port:
- MELCLoud, last 4 numbers of device Id, correct port is displayed in HB log during start.
- MELCLoud Home, start at 30000, correct port is displayed in HB log during start.
POST data as a JSON Object {OperationMode: 8}.
Header content type must be application/json.
Path status response all available paths.

| Method | URL | Path | Response | Type | | --- | --- | --- | --- | --- | | GET | http//ip:port | info, state | {"Power": true, "SetTemperature": 21.5} | JSON object. |

| Method | URL | Key | Value | Type | Description | | --- | --- | --- | --- | --- | --- | | Air Conditioner | | | | | | | POST | http//ip:port | Power | true, false | boolean | Power state. | | | http//ip:port | HideVaneControls | true, false | boolean | Hide vane controls. | | | http//ip:port | HideDryModeControl | true, false | boolean | Hide dry mode control. | | | http//ip:port | ProhibitSetTemperature | true, false | boolean | Lock set temperature. | | | http//ip:port | ProhibitOperationMode | true, false | boolean | Lock set operating mode. | | | http//ip:port | ProhibitPower | true, false | boolean | Lock set power. | | | http//ip:port | OperationMode | 1 - Heat, 2 - Dry, 3 - Cool, 7 - Fan, 8 - Auto | integer | Operating mode. | | | http//ip:port | FanSpeed | 0 - Auto, 1, 2, 3, 4, 5, 6 | integer | Fan speed. | | | http//ip:port | VaneHorizontalDirection | 0, 1, 2, 3, 4, 5, 8 - Split, 12 - Swing | integer | Vane H mode. | | | http//ip:port | VaneVerticalDirection | 0, 1, 2, 3, 4, 5, 7 - Swing | integer | Vane V mode. | | | http//ip:port | SetTemperature | 0.0 | float | Room temperature. | | | http//ip:port | DefaultCoolingSetTemperature | 0.0 | float | Default cooling temperature. | | | http//ip:port | DefaultHeatingSetTemperature | 0.0 | float | Default heating temperature. | | | http//ip:port | FrostProtection | true, false | boolean | Frost protectin. | | | http//ip:port | OverheatProtection | true, false | boolean | Overheat protection. | | | http//ip:port | HolidayMode | true, false | boolean | Holiday mode. | | | http//ip:port | Schedules | true, false | boolean | Schedules. | | Heat Pump | | | | | | | POST | http//ip:port | Power | true, false | boolean | Power state. | | | http//ip:port | ForcedHotWaterMode | true, false | boolean | Force hot water. | | | http//ip:port | EcoHotWater | true, false | boolean | Eco hot water. | | | http//ip:port | ProhibitZone1 | true, false | boolean | Lock control zone 1. | | | http//ip:port | ProhibitZone2 | true, false | boolean | Lock control zone 2. | | | http//ip:port | ProhibitHotWater | true, false | boolean | Lock control hot water. | | | http//ip:port | OperationMode | 0 - Auto, 1 - Heat, 2 - Cool | integer | Operating mode heat pump. | | | http//ip:port | OperationModeZone1 | 0 - Heat Thermostat, 1 - Heat Flow, 2 - Heat Curve, 3 - Cool Thermostat, 4 - Cool Flow, 5 - Flor Dry Up | integer | Operating mode zone 1. | | | http//ip:port | OperationModeZone2 | 0 - Heat Thermostat, 1 - Heat Flow, 2 - Heat Curve, 3 - Cool Thermostat, 4 - Cool Flow, 5 - Flor Dry Up | integer | Operating mode zone 2. | | | http//ip:port | SetTemperatureZone1 | 0.0 | float | Temperature zone 1. | | | http//ip:port | SetTemperatureZone2 | 0.0 | float | Temperature zone 2. | | | http//ip:port | SetHeatFlowTemperatureZone1 | 0.0 | float | Heat flow temperature zone 1. | | | http//ip:port | SetHeatFlowTemperatureZone2 | 0.0 | float | Heat flow temperature zone 2. | | | http//ip:port | SetCoolFlowTemperatureZone1 | 0.0 | float | Cool flow temperature zone 1. | | | http//ip:port | SetCoolFlowTemperatureZone2 | 0.0 | float | Cool flow temperature zone 2. | | | http//ip:port | SetTankWaterTemperature | 0.0 | float | Hot water temperature. | | | http//ip:port | HolidayMode | true, false | boolean | Holiday mode. | | | http//ip:port | Schedules | true, false | boolean | Schedules. | | Energy Recovery Ventilation | | | | | | | POST | http//ip:port | Power | true, false | boolean | Power state. | | | http//ip:port | NightPurgeMode | true, false | boolean | Night purge mode. | | | http//ip:port | HideRoomTemperature | true, false | boolean | Hide room temperature. | | | http//ip:port | HideSupplyTemperature | true, false | boolean | Hide supply temperature. | | | http//ip:port | HideOutdoorTemperature | true, false | boolean | Hide outdoor temperature. | | | http//ip:port | OperationMode | 1 - Heat, 3 - Cool, 7 - Fan, 8 - Auto | integer | Operating mode. | | | http//ip:port | VentilationMode | 0 - Lossnay, 1 - Bypass, 2 - Auto | integer | Ventilation mode. | | | http//ip:port | SetFanSpeed | 0 - Auto, 1, 2, 3, 4 | integer | Fan speed. | | | http//ip:port | SetTemperature | 0.0 | float | Room temperature. | | | http//ip:port | DefaultCoolingSetTemperature | 0.0 | float | Default cooling temperature. | | | http//ip:port | DefaultHeatingSetTemperature | 0.0 | float | Default heating temperature. | | | http//ip:port | HolidayMode | true, false | boolean | Holiday mode. | | | http//ip:port | Schedules | true, false | boolean | Schedules. |

MQTT Integration

Subscribe data as a JSON Object {"Power": true}

| Direction | Topic | Message | Type | | --- | --- | --- | --- | | Publish | Info, State | {"Power": true, "SetTemperature": 21.5} | JSON object. |

| Method | Topic | Key | Value | Type | Description | | --- | --- | --- | --- | --- | --- | | Air Conditioner | | | | | | | Subscribe | Set | Power | true, false | boolean | Power state. | | | Set | HideVaneControls | true, false | boolean | Hide vane controls. | | | Set | HideDryModeControl | true, false | boolean | Hide dry mode control. | | | Set | ProhibitSetTemperature | true, false | boolean | Lock set temperature. | | | Set | ProhibitOperationMode | true, false | boolean | Lock set operating mode. | | | Set | ProhibitPower | true, false | boolean | Lock set power. | | | Set | OperationMode | 1 - Heat, 2 - Dry, 3 - Cool, 7 - Fan, 8 - Auto | integer | Operating mode. | | | Set | FanSpeed | 0 - Auto, 1, 2, 3, 4, 5, 6 | integer | Fan speed. | | | Set | VaneHorizontalDirection | 0, 1, 2, 3, 4, 5, 8 - Split, 12 - Swing | integer | Vane H mode. | | | Set | VaneVerticalDirection | 0, 1, 2, 3, 4, 5, 7 - Swing | integer | Vane V mode. | | | Set | SetTemperature | 0.0 | float | Room temperature. | | | Set | DefaultCoolingSetTemperature | 23.0 | float | Default cooling temperature. | | | Set | DefaultHeatingSetTemperature | 21.0 | float | Default heating temperature. | | | Set | FrostProtection | true, false | boolean | Frost protectin. | | | Set | OverheatProtection | true, false | boolean | Overheat protection. | | | Set | HolidayMode | true, false | boolean | Holiday mode. | | | Set | Schedules | true, false | boolean | Schedules. | | Heat Pump | | | | | | | Subscribe | Set | Power | true, false | boolean | Power state. | | | Set | ForcedHotWaterMode | true, false | boolean | Force hot water. | | | Set | EcoHotWater | true, false | boolean | Eco hot water. | | | Set | ProhibitZone1 | true, false | boolean | Lock control zone 1. | | | Set | ProhibitZone2 | true, false | boolean | Lock control zone 2. | | | Set | ProhibitHotWater | true, false | boolean | Lock control hot water. | | | Set | OperationMode | 0 - Auto, 1 - Heat, 2 - Cool | integer | Operating mode heat pump. | | | Set | OperationModeZone1 | 0 - Heat Thermostat, 1 - Heat Flow, 2 - Heat Curve, 3 - Cool Thermostat, 4 - Cool Flow, 5 - Flor Dry Up | integer | Operating mode zone 1. | | | Set | OperationModeZone2 | 0 - Heat Thermostat, 1 - Heat Flow, 2 - Heat Curve, 3 - Cool Thermostat, 4 - Cool Flow, 5 - Flor Dry Up | integer | Operating mode zone 2. | | | Set | SetTemperatureZone1 | 0.0 | float | Temperature zone 1. | | | Set | SetTemperatureZone2 | 0.0 | float | Temperature zone 2. | | | Set | SetHeatFlowTemperatureZone1 | 0.0 | float | Heat flow temperature zone 1. | | | Set | SetHeatFlowTemperatureZone2 | 0.0 | float | Heat flow temperature zone 2. | | | Set | SetCoolFlowTemperatureZone1 | 0.0 | float | Cool flow temperature zone 1. | | | Set | SetCoolFlowTemperatureZone2 | 0.0 | float | Cool flow temperature zone 2. | | | Set | SetTankWaterTemperature | 0.0 | float | Hot water temperature. | | | Set | HolidayMode | true, false | boolean | Holiday mode. | | | Set | Schedules | true, false | boolean | Schedules. | | Energy Recovery Ventilation | | | | | | | Subscribe | Set | Power | true, false | boolean | Power state. | | | Set | NightPurgeMode | true, false | boolean | Night purge mode. | | | Set | HideRoomTemperature | true, false | boolean | Hide room temperature. | | | Set | HideSupplyTemperature | true, false | boolean | Hide supply temperature. | | | Set | HideOutdoorTemperature | true, false | boolean | Hide outdoor temperature. | | | Set | OperationMode | 1 - Heat, 3 - Cool, 7 - Fan, 8 - Auto | integer | Operating mode. | | | Set | VentilationMode | 0 - Lossnay, 1 - Bypass, 2 - Auto | integer | Ventilation mode. | | | Set | SetFanSpeed | 0 - Auto, 1, 2, 3, 4 | integer | Fan speed. | | | Set | SetTemperature | 0.0 | float | Room temperature. | | | Set | DefaultCoolingSetTemperature | 23.0 | float | Default cooling temperature. | | | Set | DefaultHeatingSetTemperature | 21.0 | float | Default heating temperature. | | | Set | HolidayMode | true, false | boolean | Holiday mode. | | | Set | Schedules | true, false | boolean | Schedules. |

Published

Vulnerabilities

Links

Maintainers

Keywords

Readme