iobroker.conexa
v0.1.12
Published
Reads meter readings and tariff profiles (TAF) locally via the M2M HAN interface.
Readme
ioBroker.conexa
Tests:
Support the project ❤️
If you enjoy this adapter, I would be grateful for a small contribution!
Fee transparency: PayPal.me charges approximately 2.49% + €0.35 per donation. Ko-fi charges no platform fee (only standard payment processing fees apply).
conexa adapter for ioBroker
Reads meter readings and tariff profiles (TAF) locally via the M2M HAN interface.
Overview & Supported Hardware
This adapter reads meter readings and tariff profiles (TAF) from the Theben CONEXA 3.0 Smart Meter Gateway.
It communicates locally with the gateway through the M2M HAN interface using HTTPS and XML. No cloud service is required.
Prerequisites
- The M2M HAN interface must be activated on the CONEXA 3.0 gateway.
- The ioBroker host must be able to reach the gateway on the network, typically through HTTPS port 443.
- M2M user credentials must be provided by the metering point operator (Messstellenbetreiber).
Configuration
Create or open the adapter instance in ioBroker and configure:
- IP address / hostname: Network address of the CONEXA 3.0 gateway.
- Port: HTTPS port used to connect to the gateway (normally 443).
- Username: M2M user name.
- Password: M2M password.
- Polling interval: Interval in minutes between gateway requests.
Object Structure & States
The adapter creates states below conexa.0:
info.*: Connection indicator and other adapter information.gateway.*: Gateway status, the structured system log table inlogTableJson, the next poll timestamp, and grid operator transmission tracking.gateway.marketTransmissions.*: Event 16001 transmission totals, today's count, last transmission timestamp, and JSON history.usagePoints.*: Dynamically discovered tariff profiles such as TAF-1, TAF-2, and TAF-7.- TAF states: Raw values, calculated Wh and kWh readings, consumption for the last interval in
deltaWh, average power inaveragePowerW, and capture timestamps.
Changelog
0.1.12 (2026-11-19)
- (ChristianPeymann) Removed old news entries from io-package.json
0.1.11 (2026-11-19)
- (ChristianPeymann) Prevented case-insensitive collisions between dynamic usage point IDs
- (ChristianPeymann) Updated existing dynamic object names with 11-language translations
- (ChristianPeymann) Added configurable polling interval and translated its label
- (ChristianPeymann) Translated remaining error messages and removed unused template configuration
0.1.10 (2026-11-18)
- (ChristianPeymann) Translated all log messages to English
- (ChristianPeymann) Added full 11-language i18n support for dynamic objects
- (ChristianPeymann) Improved documentation and separated developer manual into DEVELOPMENT.md
- (ChristianPeymann) Updated package description to English
0.1.9 (2026-10-26)
- (ChristianPeymann) Adjusted minimum Node.js version to 22
0.1.8 (2026-10-26)
- (ChristianPeymann) Fixed state roles and added missing translations for object definitions
License
MIT License
Copyright (c) 2026 Christian Peymann [email protected]
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
