scte104-cli

A complete implementation of the SCTE-104 TCP/IP protocol in Typescript. Supports both client and server, and includes a command line client.

I started this project as a fork of @/scte104 made by astronautlabs, so please provide him the credits.

Summary

This library has the main features of @/scte104 with few improvements (or not 🫣), mostly on the SCTE104 Client and Cli framework.

Installation

npm install scte104-cli -g
scte104-cli --help

Command line interface

CLI Examples

These are the main examples of what you can do with the cli

# Send an Init Request with dpi pid index 1000
scte104-cli --host 127.0.0.1 --port 5167 do "init --dpi-pid-index 1000;"

# Send an Init Request, Alive Request, a Splice Start Request and a Splice End Request with dpi pid index 1000 waiting 3 seconds for each opearation
scte104-cli --host 127.0.0.1 --port 5167 do "init --dpi-pid-index 1000; alive --dpi-pid-index 1000; splice --dpi-pid-index 1000 --splice-insert-type 1 --splice-event-id 10; splice --dpi-pid-index 1000 --splice-insert-type 2 --splice-event-id 11;"

# Send continuosly Alive requests each 5 seconds
scte104-cli --host 127.0.0.1 --port 5167 --wait 5000 loop "alive --dpi-pid-index 1000"

Cli Usage

The scte104-cli supports two different subcommands, do and loop.

• do perform a sequence of SCTE104 operations without dropping the connection to the target SCTE104 server.
• loop perform indefinitely a list of operations. Here to stop the client you will need to send a Cntrl+C signal.

Usage: scte104-cli [options] [command]

Implementation of the SCTE-104 TCP/IP protocol

Options:
  -h, --host <string>        scte104 server address
  -p, --port <number>        scte104 server port (default: "5167")
  --log-level <string>       Log level used by the client code (default: "info")
  --buffer-size <number>     size in bytes used by the client to store incoming data from the TCP socket. It should be greater than the maximum message length in bytes received (default: "100")
  --wait <number>            how many millis the client should wait before performing a scte104 operation (default: "1000")
  --message-number <number>  starting number of the first message sent by the client to the scte104 server. Used to match the received messages from the sent ones (default: "1")
  -V, --version              output the version number
  --help                     display help for command

Commands:
  do <string>                Execute a list of scte104 commands
  loop <string>              Execute in a loop a list of scte104 commands
  help [command]             display help for command

Do subcommand

scte104-cli --host 127.0.0.1 do --help
Usage: cli-do [options] [command] <cmds>

Execute a list of scte104 commands. The list of commands must be passed as a string and must be separated using the characer <sep>
e.g: do "init <init-options><sep> alive <alive-options><sep> splice <splice-options><sep>

Options:
  --sep <string>  separator charcter used to split the argument of 'do' string in a list of commands (default: ";")
  -h, --help      display help for command

Commands:
  init <opts>     send a scte104 init message
  alive <opts>    send a scte104 alive message
  splice <opts>   send a scte104 splice message

Loop subcommand

scte104-cli --host 127.0.0.1 loop --help
Usage: cli-loop [options] [command] <cmds>

Execute an infinite loop that perform a list of scte104 commands. The list of commands must be passed as a string and must be separated using the characer <sep>
e.g: loop "init <init-options><sep> alive <alive-options><sep> splice <splice-options><sep>"

Options:
  --sep <string>  separator charcter used to split the argument of 'do' string in a list of commands (default: ";")
  -h, --help      display help for command

Commands:
  init <opts>     send a scte104 init message
  alive <opts>    send a scte104 alive message
  splice <opts>   send a scte104 splice message

Operation argument strings

The arguments string of the SCTE104 operations depends on the type of the operation, all of them have different paramenter.

# Send an Init Request, then a Splice Request 
e.g: scte104-cli --host 127.0.0.1 do "init --dpi-pid-index 1000; splice --dpi-pid-index 1000;"

Here the available parameters for a Splice Request :

scte104-cli --host 127.0.0.1 do splice --help
Usage: cli-do-splice [options]

Scte104 parameters for splice request

Options:
  --dpi-pid-index <number>       Dpi pid index
  --splice-insert-type <number>  Specify the type of the splice: e.g: SPLICE_START_NORMAL: 1, SPLICE_START_IMMEDIATE: 2, SPLICE_END_NORMAL: 3, SPLICE_END_IMMEDIATE: 4, SPLICE_CANCEL: 5 (choices: "1", "2", "3",
                                 "4", "5")
  --splice-event-id <number>     Specify an ID for this splice event. Must be unique when the event is submitted, and remain unique until the event is processed (default: "1")
  --unique-program-id <number>   SHOULD be the unique identifier of the viewing event that this splice event is designated for. (default: "1")
  --pre-roll-time <number>       Specify the pre-roll time for this splice event in milliseconds. SCTE 104 specifies that pre-roll time SHALL be no less than 4000 millisecond (default: "4000")
  --break-duration <number>      Specify the break duration for this splice in tenths of a seconds (default: "2400")
  --avail-num <number>           Specify which "avail" this splice represents (default: "0")
  --avails-expected <number>     Specify how many "avails" are expected during this event (default: "0")
  --auto-return-flag <number>    Specify that this splice should automatically end without requiring a splice-end event (default: "0")
  --duration <string>            Specify the time duration to add to now (UTC) when creating the splice timestamp payload. The string is following the FFmpeg Time duration syntax: e.g: 00:00:05 (+ 5 seconds ).
                                 Check here https://ffmpeg.org/ffmpeg-utils.html#time-duration-syntax (default: {"seconds":30})
  -h, --help                     display help for command

Client Library

You can use this library to write your own SCTE104 Client and Server. These Client and Server both follow the @/scte104 logics.

import * as SCTE104 from "scte104-cli";
const sleep  = require("sleep-promise");

async function main() {
    let host = '127.0.0.1';
    let port = 5167;
    let dpiPidIndex = 1000;
    const clientConfig = new SCTE104.args.Config({host:host, port:port});
    let client = new SCTE104.Client(clientConfig)

    // connect to the server
    await client.connect(host=host);
    sleep(1000);

    // send an init request
    let initRequestParameters = new SCTE104.args.Init({dpiPidIndex:dpiPidIndex})
    await client.init(initRequestParameters);
    sleep(1000);

    // send a alive request
    let AliveRequestParameters = new SCTE104.args.Alive({dpiPidIndex:dpiPidIndex});
    await client.alive(AliveRequestParameters);
    sleep(1000)

    // send a splice start
    let spliceEventId = 1;
    let SpliceRequestParameters = new SCTE104.args.Splice({dpiPidIndex:dpiPidIndex, spliceInsertType: SCTE104.SPLICE_START_NORMAL, spliceEventId:spliceEventId});
    await client.splice(SpliceRequestParameters);
    sleep(1000)

    // send a splice end
    spliceEventId++;
    SpliceRequestParameters = new SCTE104.args.Splice({dpiPidIndex:dpiPidIndex, spliceInsertType: SCTE104.SPLICE_END_NORMAL, spliceEventId:spliceEventId});
    await client.splice(SpliceRequestParameters);
    sleep(1000)


    // disconnect
    await client.disconnect()
}

main();

Server Library

import * as SCTE104 from "scte104-cli";

async function main() {
    let host = '127.0.0.1';
    let port = 5167;
    const serverConfig = new SCTE104.args.Config({host:host, port:port})
    let server = new SCTE104.Server(serverConfig);
 
    // bind default behaviour on message received
    server.messageReceived.subscribe(SCTE104.ServerDefaultCallback, SCTE104.ServerDefaultErrorCallback);

    // put on listen the server
    server.listen(port=port, host=host);
}

main();

ServerDefaultCallback and ServerDefaultErrorCallback are some default callback template that let the server responsive to incoming Init Alive and Splice request.

Please check examples directory for other examples.

Dependencies

Tested with the following versions

node: v20.12.2
npm: 10.5.0

Please check the package.json for the specific libraries version. Some of them are really important and upgraded version may be not work. Here the critical ones:

"@astronautlabs/bitstream": "2.0.2" 
"date-fns": "2.30.0"
"commander": "14.0.1"