viberun

viberun is a shell-first, agent-native app host. Run viberun to open the shell, then vibe <app> to jump into a persistent Ubuntu container on a remote host. App data is stored under /home/viberun and survives container restarts or image updates.

Quick start (end-to-end)

You need a local machine with ssh and a reachable Ubuntu host (VM or server) that you can SSH into with sudo access.

1) Install the CLI

curl -fsSL https://viberun.sh | bash

Verify:

viberun --version

Optional overrides (advanced):

curl -fsSL https://viberun.sh | bash -s -- --dev
curl -fsSL https://viberun.sh | bash -s -- --dir ~/.local/bin --bin viberun

Dev channel (latest main):

npx -y viberun@dev
uvx viberun-dev
curl -fsSL https://viberun.sh | bash -s -- --dev

Or with env vars:

curl -fsSL https://viberun.sh | VIBERUN_INSTALL_DIR=~/.local/bin VIBERUN_INSTALL_BIN=viberun bash

2) Connect a host (once per VM)

Start the shell:

viberun

If this is the first time, you'll see a setup banner. Type:

setup

Enter your SSH login (for example, user@myhost in ~/.ssh/config). You can also run setup directly from the CLI:

viberun setup myhost

3) Start your first app

Inside the shell:

vibe hello-world

If this is the first run, the server will create the container.

Detach without stopping the agent: Ctrl-\ . Reattach later with vibe hello-world. Paste clipboard images into the session with Ctrl-V; viberun uploads the image and inserts a /tmp/viberun-clip-*.png path.

4) Hello-world prompt (paste inside the session)

Create a beautiful hello-world web app with a simple, tasteful landing page.

5) Open the app

From the shell:

open hello-world

When the shell starts, viberun forwards app ports automatically. open prefers a public URL if configured; otherwise it uses the localhost URL.

Common commands

Shell commands (inside viberun):

vibe myapp
open myapp
apps
app myapp
rm myapp

CLI commands (advanced):

viberun setup [<host>]
viberun wipe [<host>]

• Quick start (end-to-end)
• Common commands
• Git setup
• Development
• Architecture
  • High-level flow
  • Core components
  • Session lifecycle
  • Setup pipeline
  • Networking and ports
  • App URLs and proxy
  • Snapshots and restore
  • Host RPC bridge
  • Configuration and state
  • Agents
  • Security model
  • Wipe (safety)
  • Repository layout
  • Troubleshooting

Git setup

Git, SSH, and the GitHub CLI are installed in containers. viberun seeds git config --global user.name and user.email from your local Git config into a host-managed config file that is mounted into each app container and applied on startup. This removes the common "first commit" setup step without auto-authing you.

Choose one of these auth paths:

• SSH (agent forwarding): Start viberun with VIBERUN_FORWARD_AGENT=1 viberun, then vibe <app>. For existing apps, run app <app> followed by update once to recreate the container with the agent socket mounted. Then ssh -T [email protected] inside the container to verify access.
• HTTPS (GitHub CLI): Run gh auth login and choose HTTPS, then gh auth setup-git. Verify with gh auth status.

If you update your local Git identity later, restart the app container (or run app <app> then update) to re-apply the new values on startup.

Development

This repo is Go-first and uses mise for tool and task orchestration.

Setup

mise install

Build

mise exec -- go build ./cmd/viberun
mise exec -- go build ./cmd/viberun-server

Run locally

mise exec -- go run ./cmd/viberun -- --help
mise exec -- go run ./cmd/viberun-server -- --help

Test and vet

mise exec -- go test ./...
mise exec -- go vet ./...

Container image

mise run build:image
# fallback: docker build -t viberun .
# proxy image (Caddy + auth):
docker build -f Dockerfile.proxy -t viberun-proxy .

E2E and integration

bin/viberun-e2e-local
bin/viberun-integration

Setup in development

When you run viberun via go run (or set VIBERUN_DEV=1), setup defaults to staging the local server binary and building the container image locally. Run:

viberun
setup

Or directly:

viberun setup myhost

Under the hood, it builds a viberun:dev image for the host architecture, streams it over ssh with docker save | docker load, and tags it as viberun:latest on the host.

For the full build/test/E2E flow, see DEVELOPMENT.md.

Architecture

High-level flow

viberun (shell)
  -> vibe <app>
    -> ssh <host>
      -> viberun-server gateway (mux)
        -> viberun-server <app>
          -> docker container viberun-<app>
            -> agent session (tmux)

container port 8080
  -> host port (assigned per app)
    -> mux forward -> http://localhost:<port>
    -> (optional) host proxy (Caddy)
      -> https://<app>.<domain>

Core components

• Client: viberun CLI on your machine.
• Server: viberun-server gateway executed on the host via SSH (no long-running daemon required).
• Container: viberun-<app> Docker container built from the viberun:latest image.
• Agent: runs inside the container in a tmux session (default provider: codex).
• Host RPC: local Unix socket used by the container to request snapshot/restore operations.
• Proxy (optional): viberun-proxy (Caddy + viberun-auth) for app URLs and login.

Session lifecycle

1. viberun connects to the host (from your saved config) and starts the viberun-server gateway over SSH.
2. vibe <app> creates the container if needed, or starts it if it already exists.
3. The agent process is attached via docker exec inside a tmux session so it persists across disconnects.
4. viberun forwards app ports when the shell starts so you can open http://localhost:<port> immediately.

Setup pipeline

The setup script (run on the host) does the following:

• Verifies the host is Ubuntu.
• Installs Docker (if missing) and enables it.
• Installs Btrfs tools (btrfs-progs) for volume snapshots.
• Pulls the viberun container image from GHCR (unless using local image mode).
• Downloads and installs the viberun-server binary.

If setup is run from a TTY, it will offer to set up a public domain name (same as proxy setup in the shell).

Useful setup overrides:

• VIBERUN_SERVER_REPO: GitHub repo for releases (default shayne/viberun).
• VIBERUN_SERVER_VERSION: release tag or latest.
• VIBERUN_IMAGE: container image override.
• VIBERUN_PROXY_IMAGE: proxy container image override (for app URLs).
• VIBERUN_SERVER_INSTALL_DIR: install directory on the host.
• VIBERUN_SERVER_BIN: server binary name on the host.
• VIBERUN_SERVER_LOCAL_PATH: use a local server binary staged over SSH.
• VIBERUN_SKIP_IMAGE_PULL: skip pulling from GHCR (used for local builds).

Networking and ports

• Each app container exposes port 8080 internally.
• The host port is assigned per app (starting at 8080) and stored in the host server state.
• viberun forwards app ports when the shell starts so http://localhost:<port> connects to the host port.
• If the proxy is configured, apps can also be served over HTTPS at https://<app>.<domain> (or a custom domain). Access requires login by default and can be made public per app.

App URLs and proxy

viberun can optionally expose apps via a host-side proxy (Caddy + viberun-auth). Set it up once per host (inside the shell):

proxy setup [<host>]

You'll be prompted for a base domain and public IP (for DNS), plus a primary username/password. Create an A record (or wildcard) pointing to the host's public IP.

After setup, in the shell:

• app <app> then url shows the current URL and access status.
• url public or url private toggles access (default requires login).
• url set-domain <domain> or url reset-domain manages custom domains.
• url disable or url enable turns the URL off/on.
• url open opens the URL in your browser.
• users manages login accounts; app <app> then users controls who can access the app.

If URL settings change, run app <app> then update to refresh VIBERUN_PUBLIC_URL and VIBERUN_PUBLIC_DOMAIN inside the container.

Snapshots and restore

Snapshots are Btrfs subvolume snapshots of the app's /home/viberun volume (auto-incremented versions). On the host, each app uses a loop-backed Btrfs file under /var/lib/viberun/apps/<app>/home.btrfs.

• app <app> then snapshot creates the next vN snapshot.
• app <app> then snapshots lists versions with timestamps.
• app <app> then restore <vN|latest> restores from a snapshot (latest picks the highest vN).
• rm <app> removes the container, the app volume + snapshots, and the host RPC directory.

Restore details:

• The host stops the container (if running) to safely unmount the volume.
• The current @home subvolume is replaced by a new writable snapshot of @snapshots/vN.
• The container is started again, and s6 reloads services from /home/viberun/.local/services.

Host RPC bridge

When you open a session, the server creates a Unix socket on the host and mounts it into the container at /var/run/viberun-hostrpc. The container uses it to request snapshot and restore operations. Access is protected by a per-session token file mounted alongside the socket.

Configuration and state

Local config lives at ~/.config/viberun/config.toml (or $XDG_CONFIG_HOME/viberun/config.toml) and stores:

• default_host
• agent_provider
• hosts (alias mapping)

Host server state lives at ~/.config/viberun/server-state.json (or $XDG_CONFIG_HOME/viberun/server-state.json) and stores the port mapping for each app.

Proxy config (when enabled) lives at /var/lib/viberun/proxy.toml (or $VIBERUN_PROXY_CONFIG_PATH) and stores the base domain, access rules, and users. When enabled, the server injects VIBERUN_PUBLIC_URL and VIBERUN_PUBLIC_DOMAIN into containers.

Agents

Supported agent providers:

• codex (default)
• claude
• gemini
• ampcode (alias: amp)
• opencode

Custom agents can be run via npx:<pkg> or uvx:<pkg> (for example, set config set agent npx:@sourcegraph/amp@latest in the shell).

Set the default agent with config set agent <provider> in the shell. To forward your local SSH agent into the container, start viberun with VIBERUN_FORWARD_AGENT=1 viberun. For existing apps, run app <app> then update once to recreate the container with the agent socket mounted.

Base skills are shipped in /opt/viberun/skills and symlinked into each agent's skills directory. User skills can be added directly to the agent-specific skills directory under /home/viberun.

Security model

• All control traffic goes over the mux over SSH; the server is invoked on demand and does not expose a network port.
• The host RPC socket is local-only and protected by filesystem permissions and a per-session token.
• Containers are isolated by Docker and only the app port is exposed.
• App URLs are optional: the proxy requires login by default and can be made public per app with app <app> then url public.

Wipe (safety)

viberun wipe [<host>] deletes local config and wipes all viberun data on the host. It requires a TTY and asks you to type WIPE.

On the host, wipe removes:

• All containers named viberun-*, any containers using viberun images, and the proxy container (default viberun-proxy).
• All viberun images (including the proxy image).
• App data and snapshots under /var/lib/viberun (including per-app Btrfs volumes).
• Host RPC sockets in /tmp/viberun-hostrpc and /var/run/viberun-hostrpc.
• /etc/viberun, /etc/sudoers.d/viberun-server, and /usr/local/bin/viberun-server.

Locally, it removes ~/.config/viberun/config.toml (and legacy config if present).

Repository layout

• cmd/: Go entrypoints (viberun, viberun-server, viberun-auth).
• internal/: Core packages (config, server state, SSH args, target parsing, TUI helpers).
• bin/: Helper scripts for installs, integration/E2E flows, and container utilities.
• skills/: Codex skill definitions used inside containers.
• config/: Shell/TMUX/Starship config, auth assets, and runtime configs.
• Dockerfile: Base container image definition.
• Dockerfile.proxy: Proxy image definition (Caddy + auth).

Troubleshooting

• unsupported OS: ... expected ubuntu: setup currently supports Ubuntu only.
• docker is required but was not found in PATH: install Docker on the host or rerun setup.
• missing btrfs on host: rerun setup to install btrfs-progs and ensure sudo access.
• no host provided and no default host configured: run setup in the shell or viberun setup myhost.
• container image architecture mismatch: delete and recreate the app (rm <app>).
• proxy is not configured: run proxy setup (then retry app <app> and url).